1、压力机的机身主要部位采用钢板焊接分体式结构或钢板焊接整体式机身结构，分体式结构中的顶座，中台身，底座通过四根补强杆预紧而组成一体，具有高刚性台身。
2、压力机采用偏心齿轮，传动稳定，噪音低
3、在采用了四角八面导路长导轨导向，侧向力小，精度高。
4、压力机的工作台可选用固定式或向前开出，向后开出，左右开出和“T”型移动等多种形式，用户可根据设备布置，单机或生产线等具体条件自行选定。移动台车更换模具方便、迅速。
5、压力机的模型可采用气垫式固定行程或可调节行程，以满足各种结构复杂，需拉伸零件的工艺需求。
6、压力机的润滑系统采用了自动循环系统，连续的定点、定量给油方式，具备管路堵塞、破裂、油量不足等故障检测装置。
7、压力机的电气控制系统采用可编程（PLC）控制系统，可是电子凸轮开头、控制角监控与显示、压力监控吨位显示等多种功能通过PLC来控制实现。T selling point
1.The main part of the fuselage of the press adopts welded steel split structure or steel plate welded integral boby structure,a top seat,a split structure in Taiwan,the base througr four reinforced rod preload and the composition of one,with high rigidity boby of tainwan.
2.Press the eccentric gear,stable transmission,low noise.
3.In the use of four homs and eight guide path length of guide rail,the lateral force is small,high precision.
4.Press can be fixed or forward out of open,backward,or departure and “T”type mobile and other forms,the user can according to the equipment layout,single machine or priduction line and other speciic conditions selected by the.Mobile trolley mould replacenment convenient,fast.
5.Die cushion of press can use air cushion type fixed stroke or adjustable stroke,to meet a variety of complex structure,the process needs to be drawing parts.
6.Lubncation system for press can press adopts automatic cycle,continuous fixed-point,quantitative oil feeding way,with pipeline blickage,rupture,the amouny of oil shortage of fault detection device.
7.The electrical control system of press machine adopts programmable(PLC)control system,but at the beginning,electronic cam brake angle moniting and display,pressure monitoring tonnage display a variety of function through PLC to control the realization of.
